Interferometry Transmitter generated clouds off Baja CA coast (above) / Sept.26, 2017. Note that the clouds themselves are almost forming in the the ‘star crystals’ that Harald Kautz Vella refers to in his discussion of military after-burner technology. https://go.nasa.gov/2wlgkk4
VSF: This is not for everyone. If you are fearful, then I don’t recommend that your read this. However, it does explain the ‘mechanics’ of the foothold invasion of our planet by the Dracos and the Zeta Reticula. They are working to create a hybrid human body that will be compatible with their own soul matrix — and at the same time, phase out the Human Angelic Soul Matrix, so that we will no longer be ‘comfortable’ in our human form. Nicolay & Jang say that eventually the Earth will shake them off, but for now this invasion serves the higher purpose of encouraging those who are ready, to wake-up, evolve, and move into higher consciousness and the higher dimensional realms.
Forgive my somewhat flawed notes. Harald is amazing, but he admits that his English is imperfect and sometimes I could not catch the word he is using. This video is very long and I have transcribed what I felt was most important for you.
“A Gathering Of Momentum Part 9” / Harald Kautz Vella / Shayne Benatter
Nate Max TV / Published on May 18, 2017
HKV: [What is in the aerosol spraying…] Microscope resolution of raindrops 1000-5000 observe particles in the raindrops and see all the particles in the raindrops. This is a high-tech very intelligent (@11:11) very exotic particles substances devises and things that work together as one technology. This is what you find under the microscope and you find it every day. We have thousands of pictures and people who are doing this for years now, every day micros coping rain. And to give you an example of how exotic these substances are, you find a type of nano-crystal that converts body heat to visible light. (@11:55) You can switch off the light of your microscope and when you take your finger and you start to point in the direction of the (probe? – rain drop), the moment you reach the distance of one cm to the raindrop, it starts to glow and shine like a neon bulb – just by converting body heat to visible light. And you can check the literature for substances that have the ability to do this and actually you will find one that is extremely exotic and artificially made and this is (@12:30) Barium Strontium Titanate doped with Europium and other rare earth elements. This is so high tech so exotic that it needs a lot of effort and intelligence to put this nano-crystal together. This is one of the key components of this technology – having these nano-crystals.
Europium is a chemical element with symbol Eu and atomic number 63. It was isolated in 1901 and is named after the continent of Europe. It is a moderately hard, silvery metal which readily oxidizes in air and water. Being a typical member of the lanthanide series, europium usually assumes the oxidation state +3, but the oxidation state +2 is also common. All europium compounds with oxidation state +2 are slightly reducing. Europium has no significant biological role and is relatively non-toxic compared to other heavy metals. Most applications of europium exploit the phosphorescence of europium compounds. Europium is one of the least abundant elements in the universe; only about 5×10−8% of all matter in the universe is europium.
West coast of Africa (above) / Jan.18, 2017 http://go.nasa.gov/2jNuwMw
Now the question is (13:02) how does this connect to the ‘trails’ (aerosol sprays), and this is easy to explain if you look into the possible methods of creating Barium Strontium Titanate. There are five industrial processes that have the ability to create these nano-crystals. (13:21) And the most common one is spray PYROLYSIS.
Liquid–feed flame spray pyrolysis (LF-FSP) is one of the most recent iterations in flame spray pyrolysis (FSP) powder production technology. FSP produces metal oxide powders from highly volatile gaseous metal chlorides that are decomposed/oxidized in hydrogen-oxygen flames to form nano-oxide powders. However, products made from FSP’s vapor-phase process are limited to Al-, Ti-, Zr-, and Si-based oxides from their metal chlorides. Thus, interest in producing more complex materials required a new methodology, LF-FSP.
LF-FSP, as invented at the University of Michigan, uses metalloorganic precursors such as metal carboxylates or alkoxides, not metal chlorides. Briefly, alcohol (typically ethanol) solutions containing 1–10 wt % loading of the target ceramic components as precursors are aerosolized with O2 into a quartz chamber and ignited with methane pilot torches. Initial combustion temperatures run 1500–2000 °C, depending on the processing conditions, generating nanopowder “soot”. Temperatures drop to 300–500 °C over 1.5 m, equivalent to a 1000 °C quench in 100 ms leading to kinetic products and nanopowders that are unaggregated. Production rates can be 200 g/h when using wire-in-tube electrostatic precipitators operating at 10 kV. Typical powders have 15–100 nm average particle sizes (APS) with specific surface areas of 30–100 m2/g. LF-FSP technology can be used to produce mixed and single metal oxides easily from low cost starting materials in a single step without forming harmful byproducts like HCl, which forms when metal chlorides are used as precursors.
You create little droplets so they contain metal salts, and you spray them into a flame (13:39) – and on the other side when the flame is coming out, then you get these nano-crystals out of the flame, because the droplets dry or burn and the crystals melt in the flame – and if you check for the industrial process, you find that you need a temperature degree from 750 to 600 degrees (14:02) as an optimum to create Barium Strontium Titanate nano-crystal.
BST (Barium Strontium Titanate) is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Titanate compounds contain a form of Titanium Oxide and have various applications including electronics, ceramics, and batteries (in the case of Lithium Titanate). Researchers from the University of Illinois recently created nanofiber mats of zinc titanate that can scrub sulfur impurities from petroleum-based fuels more efficiently than existing methods, a nanotechnology-based development that may lower the cost of fuel technologies in the future. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.
Now guess what temperature is in the regular jet engine, in the exhaust output? (14:11) It’s 750-600 degrees. So you have all the conditions you need, all you need is getting the metal salts in the right composition into the fuel. Because it’s forming metal droplets, you have like a nozzle that creates this fuel vapor in the engine, so all the conditions are given for extreme easy production of these nano-crystals — and they do everything you observe in the sky. They PHOTO-IONIZE (?). So basically this is a very clear set up, regarding one of the components that you can see in raindrops.
Other components that can also be explained, (15:12) like how do you produce them in engines. Sometimes you need higher temperatures. We have after-burner technology, but this goes more into the military domain than … After-burner technology is using aluminum fuel that burns (15:29) at 1700 degrees. What you observe in the raindrops are ____ (?) like star-shaped micro-crystals aluminum oxide – and one of the technologies for producing them is having a flame (Liquid–feed flame spray) pyrolysis coming down from 1700 degrees is exactly the temperature in after-burner technologies. So again it all comes together if you look at facts.
Another thing is asking questions about total amounts. How much do we have from this. And the problem is that all these nano-crystals are not soluble in essence, so they don’t show up in standard environmental ____ (16:22). They are not detectable. You cannot count crystals, because you would go mad! … counting that size of things. So you need to ask the right questions to come down to numbers. Looking at the efficiency of the nano-crystal production, which is 85%. If you introduce mineral salt into fuel and then run the spray (Liquid–feed flame spray) pyrolysis process, (16:57) 85% come out as crystals and 15% still come out as normal chemistry that is soluble in rainwater.
Actually you can kind of measure the Barium Strontium Titanium Aluminum in rainwater and then multiple this value by 15%, which is by eight — then you will get an estimation of how much crystals are in the ____ (?). And if you do this, you can do this easily by using the state environmental monitoring data just available and then you come to the number of 7000 tons of nano-crystals raining down per year on just Germany alone. (17:51) Harald did these calculations for Germany only.
North of Antarctica in the middle area of the Pacific Ocean (above) / Jan.5, 2017. Enhanced contrast & sepia for structural patterns. http://go.nasa.gov/2iKgZFC
The EFFECTS: Three generations of trans-humanistic technologies
You can take the effects from the sky, (18:17) or from the chemicals, because judging the effects you need to understand the technology these chemicals are a part of. You get a “zoo” of things. And you can sometimes see how these things interact and the microscope if you are lucky. You can catch the right sequence and see something happening between these particles. The best access to understand the concept behind is if you look at disease. Because (19:00) what we can say up to now is that we discovered three generations of trans-humanistic technologies, that on the one hand come one after the other, they address different parts of our body — but they interact as well, on certain levels.
Mad Cow Disease: So this is what you can find when you observe what happens when something with these technologies goes wrong. (19:33) Best example, you have this cow madness in Great Britain. 1980s …most of the cattle in GB going berserk epileptic to madness. What happened was that some medication they got containing ___ (fluorine?) chemistry striped their nervous system and dissolved parts of the nervous system. (20:12) And the Barium & Strontium coming in from the sky polluting the grass they eat as food, enriched the body with the Barium & Strontium on a chemical level, and then they had these nano-crystals — and then all the components come together to get something happening. This is the growth of an artificial ___ (ferromagnetic ?) nervous system using these piezio crystals barium-strontium crystals as the core of the neural ____ knots (?).
So basically the cow’s nervous system is completely, not partly, destroyed and the attempt of the body to repair it, creates a new type of nervous system that is utilizing all these components to build a nervous system that is accessible by microbial. (21:12) You can control the system from outside by microwave or by sound. This is when the cows (collapsed from a sound?). Because all the neurons that were firing electrons from the clap of the hand. And this is what it looks like when it goes too far. With the humans this is Creutzfeldt Jakob Disease.
But if it’s not going too far to a state of disease, people still have this artificial nervous system in their brain. And if you know how to control the microwave input, you can take over the sensations of the nervous system. And this is one part of mind control, collective and individual mind control. If you have a phase-array antenna, you can direct the microwave input on the person — you can even (22:11) influence one person only. If you want everybody to start the revolution, you can make them nervous by radiating everybody. This is one technology involving these piezo crystals.
WIKI: Piezoelectricity /piˌeɪzoʊˌilɛkˈtrɪsɪti/ is the electric charge that accumulates in certain solid materials (such as crystals, certain ceramics, and biological matter such as bone, DNA and various proteins) in response to applied mechanical stress. The word piezoelectricity means electricity resulting from pressure and heat. It is derived from the Greek piezō (πιέζω) or piezein (πιέζειν), which means to squeeze or press, and ēlektron (ήλεκτρον), which means amber, an ancient source of electric charge. Piezoelectricity was discovered in 1880 by French physicists Jacques and Pierre Curie.
The piezoelectric effect is understood as the linear electromechanical interaction between the mechanical and the electrical state in crystalline materials with no inversion symmetry. The piezoelectric effect is a reversible process in that materials exhibiting the direct piezoelectric effect (the internal generation of electrical charge resulting from an applied mechanical force) also exhibit the reverse piezoelectric effect (the internal generation of a mechanical strain resulting from an applied electrical field). For example, lead zirconate titanate crystals will generate measurable piezoelectricity when their static structure is deformed by about 0.1% of the original dimension. Conversely, those same crystals will change about 0.1% of their static dimension when an external electric field is applied to the material. The inverse piezoelectric effect is used in the production of ultrasonic sound waves.
Piezoelectricity is found in useful applications, such as the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, to drive an ultrasonic nozzle, and ultrafine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, the scanning probe microscopies, such as STM, AFM, MTA, SNOM, etc., and everyday uses, such as acting as the ignition source for cigarette lighters, and push-start propane barbecues, as well as the time reference source in quartz watches.
North of Antarctica in the middle area of the Pacific Ocean (above) / Jan.5, 2017. My aerospace contact says these forms are algos unleashed. http://go.nasa.gov/2iHwoIU
MORGELLONS DISEASE: The second technology we found working in humans was what came out as a disease called Morgellons disease. It’s not addressing the nervous system, it’s addressing the light exchange between DNA, what normally is called bio-photons (22:50) – and what you have is a technology that was developed pretty early in the 1960s, and they started and was on the way to be industrialized by Bell Labs in 1982-83, utilizing quantum dots ____ (?), like chemicals that have the ability to get and to turn microwave into visible light — the same thing you observe with these particles, but chemistry.
But they utilized these quantum dots first just injecting them into animals to see how it works. And it turned out to be too poisonous to work for good. (23:33) So they were looking for ways to encapsulate these _____ (?) in transparent units, so they were protected from the body chemistry to survive longer. And they realized that OK, if you have hollow fibers these (dyes ?) are concentrate on their own — so what they invented was a fungal infection and the fungals, when it grows, grows in a MYCELIUM (?)
WIKI: Mycelium is the vegetative part of a fungus or fungus-like bacterial colony, consisting of a mass of branching, thread-like hyphae. The mass of hyphae is sometimes called shiro, especially within the fairy ring fungi. Fungal colonies composed of mycelium are found in and on soil and many other substrates. A typical single spore germinates into a homokaryotic mycelium, which cannot reproduce sexually; when two compatible homokaryotic mycelia join and form a dikaryotic mycelium, that mycelium may form fruiting bodies such as mushrooms. A mycelium may be minute, forming a colony that is too small to see, or it may be extensive…
And when the CELIUM dies off, it kind of ‘plastifies’ or ‘silocizes’ (like silicon?) itself into hollow fibers of the right size — and then it sucks in the quantum-dot liquids, separated in colors: blue sucks in more blue, red sucks in more red, so you get colorful fiber somewhere in your body that have two abilities. They can pull in photons from your DNA light communication, convert them into a microwave signal that can be read out with an antenna system (24:38) — and the opposite like read, you could also write, like putting in microwave again, having these quantum dots turn the microwave signal into DNA readable light, so you have the read-or-write system. Make somebody angry, read out the anger, turn that into microwaves signal, take the same signal, direct it on somebody else who will sense the same anger, the same signature.
Trans-Humanism as the High-Tech Demonic!
We don’t understand exactly how this works, but we do have film of the piezo crystals interacting with the Morgellons fibers. (25:28) There are even more aspects, especially with the Morgellons. When the Morgellons fungus starts to create “fruiting bodies” there are … (a similar thing happens in autism). The entire system also involves genetically modified fungi, that have the ability to create secondary genetic clusters. And the effect of secondary genetic clusters are like “a being within the being”. (27:04) I’ve (Harald) got my human DNA, if I would have a secondary DNA in my body, I could carry a secondary being in myself because a being is attached to its DNA.
This is actually the bio-tech method of creating something that would have been regarded as a “demon” ages ago. And we find these types of demons related to the biotechnology. All you need to do is you take the fungus, you extract the DNA, you make an analysis of the DNA, and you will find the components of the secondary genetic cluster. 80% human and … spider genetics inside the body. This is old fashioned black-magic, the centuries old relationship with the demonic.
VSF: My thanks to Harald Kautz Vella.